Greasing

Greasing is needed on under chassis of the car like upper and lower ball joint, left, right and center link, without greasing the car will make some unwanted sounds and the life of the bearing will be shorten.

How to maintain it?

• 3 months or 6 months maintenance greasing.
• avoid deep flood water.
• the more flood the shorten life maintenance for greasing.

Break Stuck-up

How to know if your break stuck up?
while you drive you still can use your break, but you can feel it's too high then your speed can't accelerate more rather it more decreasing.

What to do?
Overhaul the break piston, often it occurs when not use, long years old model and always got wet.

What's the reason?
due to rust it eventually stuck-up the piston to release the break pad that's why it called stuck-up.

Cleaning the Headlight

How to clean the headlight?

• Remove wire connection to bulb
• Detach headlight assembly
• Get pail or deep basin
• Put water
  
• Put powder soap to the basin make it soapy
• Leave the head light assembly in the basin till it get dirty
• Shake assembly to remove dirt
• Re wash it with clean water
• Let it dry
• Attach assembly to the car
• Connect bulb and wire connection

Thats all you need to do for cleaning your headlight assembly.

Presure in Radiator

Do you believe that radiator can have pressure even it is not hot or unclosed radiator cap?
In the first time i know that it can't happen, but when i experience it well all i can say that what happened. I ask some mechanic about it they said old cars sometimes have these kind of problem the only solution is to remove the cylinder head and go to machine shop to resurface it and change the gasket of the cylinder head. If you know to do it you can do it your self than making high cost for the repair that even you can do it, with the proper tools and knowledge you can fix it by your self.