What is Jack?
It is used to lift the car or heavy equipment.
What are the Jack capacity?
It depends on the jack some jack can lift 2ton or higher and the length of the jack can reach depends on the manufacture and kinds.
What are the kinds of Jack?
Their are hydraulic floor type, hydraulic bottle type, air hydraulic type, air hydraulic bottle type and screw type Jack.
Sunday, November 16, 2008
Wednesday, November 12, 2008
How to tell spark plug have leaks
How to see if the spark plug have leak?
You can notice that the park plug have a color of a rust instead of white ashes, then the outer part of the spark plug have burn dirt, slightly black ... Well most spark plug must be change during tune up and after 6months to 1 yr of used also you can even feel the running performance of the engine if it okay or no good.
You can notice that the park plug have a color of a rust instead of white ashes, then the outer part of the spark plug have burn dirt, slightly black ... Well most spark plug must be change during tune up and after 6months to 1 yr of used also you can even feel the running performance of the engine if it okay or no good.
Sunday, November 9, 2008
Breaking habits
Some drivers have breaking habits like me i drive closely to the tail then break at the same time as the car in front break, some drivers use the break easily and more relax, but some step on the break really hard, some driver use break release break method or pumping break method.
Well i notice in manual transmission that when slow driving condition we often use the clutch before break and at high speed we used break before clutch. Did you notice about it? Did it run in your mind why we do that?
Well i notice with a low idle engine the break was more soft and low and if it in high idle the break also get slightly hard and high.
When we drive fast and use clutch before break you will notice that the break slide and feel like not responding or working that's why we use break before clutch on high speed.
The idle or the rpm also a basis of breaking it contribute on stepping on the break.
Well i notice in manual transmission that when slow driving condition we often use the clutch before break and at high speed we used break before clutch. Did you notice about it? Did it run in your mind why we do that?
Well i notice with a low idle engine the break was more soft and low and if it in high idle the break also get slightly hard and high.
When we drive fast and use clutch before break you will notice that the break slide and feel like not responding or working that's why we use break before clutch on high speed.
The idle or the rpm also a basis of breaking it contribute on stepping on the break.
Monday, November 3, 2008
Diesel oil used in gasoline cars
Some racer in the Philippines used diesel oil for some few reasons.
They said that comparing diesel oil and gasoline oil in heated situation diesel oil have much more purpose than gasoline oil due to its thickness and friction wise, gasoline oil when in heated situation become too thick that just slide in the piston in diesel oil when used in heated situation become not too thick which give more protection than gasoline oil that just slide in the piston, well i cant afford to try it but i have friend they used diesel oil on 1st start its rough but after heated up it smooth.
They said that comparing diesel oil and gasoline oil in heated situation diesel oil have much more purpose than gasoline oil due to its thickness and friction wise, gasoline oil when in heated situation become too thick that just slide in the piston in diesel oil when used in heated situation become not too thick which give more protection than gasoline oil that just slide in the piston, well i cant afford to try it but i have friend they used diesel oil on 1st start its rough but after heated up it smooth.
Monday, October 27, 2008
Greasing
Greasing is needed on under chassis of the car like upper and lower ball joint, left, right and center link, without greasing the car will make some unwanted sounds and the life of the bearing will be shorten.
How to maintain it?
How to maintain it?
- 3 months or 6 months maintenance greasing.
- avoid deep flood water.
- the more flood the shorten life maintenance for greasing.
Thursday, October 23, 2008
Break Stuck-up
How to know if your break stuck up?
while you drive you still can use your break, but you can feel it's too high then your speed can't accelerate more rather it more decreasing.
What to do?
Overhaul the break piston, often it occurs when not use, long years old model and always got wet.
What's the reason?
due to rust it eventually stuck-up the piston to release the break pad that's why it called stuck-up.
while you drive you still can use your break, but you can feel it's too high then your speed can't accelerate more rather it more decreasing.
What to do?
Overhaul the break piston, often it occurs when not use, long years old model and always got wet.
What's the reason?
due to rust it eventually stuck-up the piston to release the break pad that's why it called stuck-up.
Wednesday, October 8, 2008
Cleaning the Headlight
How to clean the headlight?
- Remove wire connection to bulb
- Detach headlight assembly
- Get pail or deep basin
- Put water
- Put powder soap to the basin make it soapy
- Leave the head light assembly in the basin till it get dirty
- Shake assembly to remove dirt
- Re wash it with clean water
- Let it dry
- Attach assembly to the car
- Connect bulb and wire connection
Subscribe to:
Posts (Atom)